Tannin Spot Remover

EFFECTIVE TANNIN STAIN REMOVAL

Spray solution for highly effective removal of black spots and other stains on hardwood flooring and furniture caused by things such as metal and water in contact with tannin containing woods. ie. Oak.

Reverses any staining without any sanding required before the affected area is repaired using Osmo Polyx-Oil or Osmo Maintenance Oil. 

  • Cleans and regenerates the wood at the same time
  • Maintains protected surfaces without extensive treatment
  • Easy to use for occasional or regular usage
  • Replenishes natural hard waxes, without forming a film on the surface
  • Suitable for domestic and commercial use
  • Liquid Wax Cleaner can also be used to enhance the sheen level of the surface
WeightN/A
Application Temp.+5°C to 35°C
Colours1101 Clear Satin
Approx. Coverage295-305m²/L (850-1000 ft2/L)
Approx. Dry Time30 - 40 minutes
Number of CoatsN/A
Sizes400mL (spray), 500mL, 1L

Cleaning & Removing Stains: 

Apply a small amount on a cloth or White Scotchbrite pad and scrub the dirty area

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using a White Scotchbrite pad, scrub a small amount of the product into the dirty area
  3. Wipe away dirt residues

For Heavier Stains: Apply to floor with Osmo polishing pad (very thin steel wool) or on Oak floors, a Green Scotchbrite pad. Wipe off dirt residues and reapply Osmo Polyx®-Oil to area and blend into the existing finish.

 

 

Refreshing Manually with Osmo Opti-Set: 

Apply a thin coat with the Active Fibre Cloth included in the Osmo Opti-Set

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the Active Fibre Cloth work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried with a clean micro-fibre cloth

 

Mechanically with a Floor Buffer: 

Apply a thin coat with an Osmo FloorxCenter and MicroPad; or other single disc buffer and carpet

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the MicroPad, work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried

 

Manually with a Cloth / Rag:

Apply a thin coat with an Osmo FloorxCenter and MicroPad; or other single disc buffer and carpet

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the MicroPad, work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried
Product Information Sheet MSDS Full Declaration