Easy to refresh, no sanding or primer needed
Decking-Oil
Water-repellent, extremely weather and UV resistant. Easy to apply and renew, no sanding or primer necessary.
- Effectively colours pressure treated and untreated woods
- Natural wood character and grain remains visible
- UV-Resistant (except Teak 1277)
- Microporous finish that will not crack, peel or flake
- Safe for animals and plants once dry – naturally!
- Very water and dirt resistant – water beads on surface
- Reduces wood swelling and shrinkage
- No sanding necessary for future applications
Easily applied with a brush or by using the Osmo Decking Brush designed for quick and professional results.
A quick dry time ensures it is easy to finish a deck over a weekend!
Advanced microporous finish that moves with the wood and allows it to breathe. Due to the penetration of natural oils into the wood, the coating will not peel, crack, flake or blister and instead will weather away over time.
Easy to clean and renew with no sanding or pressure washing necessary using Decking Cleaner and Wood Reviver Power Gel.
Simply clean the surface and apply a fresh coat once the finish becomes weathered.
When dry, our finishes unfil both DIN EN 71.3 (suitable for children's toys) and DIN 53160 (resistant to perspiration and saliva), making them safe for humans, animals and plants.
Water-repellent, extremely weather and UV resistant. Easy to apply and renew, no sanding or primer necessary.
- Effectively colours pressure treated and untreated woods
- Natural wood character and grain remains visible
- UV-Resistant (except Teak 1277)
- Microporous finish that will not crack, peel or flake
- Safe for animals and plants once dry – naturally!
- Very water and dirt resistant – water beads on surface
- Reduces wood swelling and shrinkage
- No sanding necessary for future applications
Easily applied with a brush or by using the Osmo Decking Brush designed for quick and professional results.
A quick dry time ensures it is easy to finish a deck over a weekend!
Advanced microporous finish that moves with the wood and allows it to breathe. Due to the penetration of natural oils into the wood, the coating will not peel, crack, flake or blister and instead will weather away over time.
Easy to clean and renew with no sanding or pressure washing necessary using Decking Cleaner and Wood Reviver Power Gel.
Simply clean the surface and apply a fresh coat once the finish becomes weathered.
When dry, our finishes unfil both DIN EN 71.3 (suitable for children's toys) and DIN 53160 (resistant to perspiration and saliva), making them safe for humans, animals and plants.
Colour Tones
1272
Thermowood
1273
Bangkirai Dark
1274
Mahogany
1275
Grey
1276
Rosewood
1277
Clear (without UV-Protection)
1278
Bangkirai
1279
Douglas Fir
1280
Larch
1281
Garapa
Compare the difference
Osmo Decking Oil extends the life of exterior deck by forming a microporous water and dirt-repellent barrier
Untreated
1278 Bangkirai
By hand with a Brush/Decking Brush
Sanding: Wood surface should be sanded to P80-P100 grit using a belt sander or similar, and all traces of old finish or paint must be removed. For exterior furniture P120-150 grit is suggested. Caution, we do not suggest using higher than P100 on decking as the surface may become slippery.
Important: A pressure washer can significantly raise the moisture content beyond 20% and surfaces prepared in this manner must be allowed to dry for 2-3 weeks before applying finish.
1. If possible apply the first coat on all sides of the decking boards before installation
2. Use an Osmo 150mm Decking Brush to apply the Decking Oil thinly and evenly, along the wood grain
3. Allow 10 to 12 hours drying time, then apply a thin second coat as above. Dried surface is satin-glossy at first and
afterwards is satin.
Note: The finish may also be buffed into the wood, in thin applications using a non-abrasive white pad or microfibre applicator pad.
Tip: The type and age of timber can have a dramatic impact on how much Decking-Oil you need.
As an example, softwood decking that is old will likely require more oil than a relatively new hardwood decking that still retains a fair amount of natural oil.
To test how much oil your deck needs, apply one thin coat, allow it to dry, then apply a droplet of oil in a corner. If the droplet of oil soaks into the wood then a further coat can be applied.
Repeat this process until the droplet of oil sits as a bead on the surface of the wood and no longer soaks into the timber. This is an indication that the timber has absorbed as much oil as possible and doesn’t require any more.
WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof
container.
Application Videos
Product Data Sheets
Have a question? Call us on 1-844-OSMOCAN (676-6226)
Monday-Friday 8:00am-5:00pm EST
Product Documentation
Product Data Sheets
Have a question? Call us on 1-844-OSMOCAN (676-6226)
Monday-Friday 8:00am-5:00pm EST
Product Documentation
