Wood Reviver Power Gel

RESTORES GREYED WOOD EASILY

Wood Reviver Power Gel is a highly effective cleaning agent for the refreshing and cleaning of greyed exterior wood. Especially developed so that it can be easily painted, even on vertical areas as it has a special non-drop formula. The deep penetrating effect of the gel removes the greyed patina, with results showing as quick as 30 minutes!

Size

  • Cleans and regenerates the wood at the same time
  • Maintains protected surfaces without extensive treatment
  • Easy to use for occasional or regular usage
  • Replenishes natural hard waxes, without forming a film on the surface
  • Suitable for domestic and commercial use
  • Liquid Wax Cleaner can also be used to enhance the sheen level of the surface
WeightN/A
Application Temp.+5°C to 35°C
Colours1101 Clear Satin
Approx. Coverage295-305m²/L (850-1000 ft2/L)
Approx. Dry Time30 - 40 minutes
Number of CoatsN/A
Sizes400mL (spray), 500mL, 1L

Cleaning & Removing Stains: 

Apply a small amount on a cloth or White Scotchbrite pad and scrub the dirty area

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using a White Scotchbrite pad, scrub a small amount of the product into the dirty area
  3. Wipe away dirt residues

For Heavier Stains: Apply to floor with Osmo polishing pad (very thin steel wool) or on Oak floors, a Green Scotchbrite pad. Wipe off dirt residues and reapply Osmo Polyx®-Oil to area and blend into the existing finish.

 

 

Refreshing Manually with Osmo Opti-Set: 

Apply a thin coat with the Active Fibre Cloth included in the Osmo Opti-Set

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the Active Fibre Cloth work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried with a clean micro-fibre cloth

 

Mechanically with a Floor Buffer: 

Apply a thin coat with an Osmo FloorxCenter and MicroPad; or other single disc buffer and carpet

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the MicroPad, work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried

 

Manually with a Cloth / Rag:

Apply a thin coat with an Osmo FloorxCenter and MicroPad; or other single disc buffer and carpet

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the MicroPad, work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried
Product Information Sheet MSDS Full Declaration