Garden Maintenance Kit

Prior to using, please ensure the product is stirred thoroughly.

PREPARATION: 

Wooden garden furniture and other wooden surfaces to be treated should be clean, dry and free from surface contaminates.

1. Before treating wooden garden furniture and other wood surfaces, they may require a light sanding or brushing with a stiff brush to remove any ingrained surface dirt and debris
2. Any traces of mold, algae or moss should be removed with a scraper or stiff brush

For Heavier Stains: Apply to floor with Osmo polishing pad (very thin steel wool) or on Oak floors, a Green Scotchbrite pad. Wipe off dirt residues and reapply Osmo Polyx®-Oil to area and blend into the existing finish.

APPLICATION:

Always do a test area before beginning any project and follow the manufacturer’s instructions on the container (or enclosed) at all times.

Use the Osmo Reviver Gel first before the Osmo Teak Oil Spray.

OSMO WOOD REVIVER POWER GEL

1. Apply the wood reviver gel to wooden garden furniture with the stiff brush provided
2. Scrub the gel in the direction of the grain working it in to the timber surface
3. After approximately 20 minutes rinse off with lots of clean water
4. For wood that has been grey / silver for a long period, a second application may be required
5. Allow 48 hours drying time before applying the Teak Oil

OSMO TEAK-OIL SPRAY

1. Spray the surface approximately 25 cm away from the substrate
2. Afterwards massage into hardwood garden furniture with the buffing fleece
3. Wipe away any excess oil with a lint-free cloth
4. Allow to dry for approximately 12 hours with good ventilation
5. Apply 2nd coat same as above