Spray Polyx
POLYX® SPRAYABLE HARDWAX-OIL SYSTEM
Osmo Spray-Polyx® is an oil/wax based Hardwax-Oil coating designed specifically for professional spray application through HVLP, Airless, Air-Assisted or Gravity-fed systems. Well suited to Millwork, Cabinets, Furniture and Staircases. Microporous and will not peel, crack, flake or blister. Resistant against dirt, water, wine, beer, coffee, tea, ect.
Advantages and benefits:
- Designed for professional spray application
- Extremely durable and hardwearing
- Quick processing and dry times by comparison
- Can be spot-repaired and refreshed with no sanding required
- Microporous finish which does not crack, peel or flake
- Very water and dirt resistant, Saliva-resistant and sweat proof
- Cross compatible with TopOil, Polyx-Oil, Oil Stain and Wood Wax Finish
Application Instructions > Spray Polyx
Application Instructions
Apply two thin coats, sanding between coats
First Coat: Apply one thin coat, allow product to dry and then lightly sand with P320 or above.
- Spray approx. 20-40 g/m2 onto wood surface
- Dust dry after approx. 2-3 hours at 20ºc or approx. 1 hour with 50ºc ambient air temperature
- Ready for sanding after 6-8 hours or 2-3 hours respectively
- Intermediate sanding P320 grit – a higher grit will produce a higher end sheen
Second Coat: Apply a second thin coat, allow to dry overnight, packaging next day.
- Spray approx. 20-40 g/m2 onto wood surface
- Dust dry after approx. 2-3 hours at 20ºc or approx. 1 hour with 50ºc ambient air temperature
- Clean tools with Osmo Brush Cleaner and Thinner (benzene-free)
| Gravity-Feed Cup | Airmix Pump | |
| Final Sanding | P150 | P150 |
| Nozzle Size | 1.6mm | 0.013” or .33mm |
| Spray Angle | – | 40° |
| Pressure (Air) | 3.0 bar | – |
| Pressure (Control Air) | – | 2.0 bar |
| Material Pressure | – | 80 bar |
| Application amount g/m2 | 20-40 | 20-40 |
| Drying time | Depending on conditions | Depending on conditions |
| Smoothing | P220 + | P220 + |
| Dust Removal | Yes, important! | Yes, important! |
Tip: Industrial Wood Wax Finish can be tinted (up to 10% by volume) with Osmo Wood Wax Finishes
Tip 2: Industrial Wood Wax Finish can be used like a regular wiping varnish, applied using a brush or cloth/rag.
Application Videos
Technical Information
| Weight | N/A |
|---|---|
| Application Temp. | +5°C to 35°C |
| Colours | 3078 Matte, 3082 Satin |
| Approx. Coverage | 258 ft2/L with one coat |
| Approx. Dry Time | 4-6 hrs |
| Number of Coats | 2 coats |
| Sizes | 2.5L, 10L |
Product Data Sheets
Have a question? Call us on 1-844-OSMOCAN (676-6226)
Monday-Friday 8:00am-5:00pm EST
Product Documentation
Product Data Sheets
Have a question? Call us on 1-844-OSMOCAN (676-6226)
Monday-Friday 8:00am-5:00pm EST
Product Documentation
