Spray Polyx


Osmo Spray-Polyx® is an oil/wax based Hardwax-Oil coating designed specifically for professional spray application through HVLP, Airless, Air-Assisted or Gravity-fed systems. Well suited to Millwork, Cabinets, Furniture and Staircases. Microporous and will not peel, crack, flake or blister. Resistant against dirt, water, wine, beer, coffee, tea, ect.

3078 Satin
3082 Gloss

  • Designed for professional spray application
  • Extremely durable and hardwearing
  • Quick processing and dry times by comparison
  • Can be spot-repaired and refreshed with no sanding required
  • Microporous finish which does not crack, peel or flake
  • Very water and dirt resistant, Saliva-resistant and sweat proof
  • Cross compatible with TopOil(s), Polyx-Oil(s), Wood Wax Finishes and Polyx Professional Colour Oilsepairable
Application Temp.+5°C to 35°C
Colours3078 Matte, 3082 Satin
Approx. Coverage24m²/L (258 ft2/L) with one coat
Approx. Dry Time4-6 hrs
Number of Coats2 coats
Sizes2.5L, 10L

First Coat: 

  1. Approx. 20 - 40 g/m2 using a cup gun, HVLP gun, airless or air-assisted airless device
  2. Either dust dry at room temperature for approx 2 - 3 hours or at 50oC ambient air for approx 1 hour
  3. The wood will be ready for sanding after 6 - 8 hours (air drying) or 2 - 3 hours (50oC ) respectively. Sand at 320-grit or higher


Second Coat: 

  1. After sanding repeat spray technique for the second coat
  2. Either dust dry at room temperature for approx 2 - 3 hours or at 50oC ambient air for approx 1 hour. Wood is stackable after 12 - 16 hours

The surface will harden further within 2-3 weeks. 


Tip:This product can be directly sprayed onto Wood Wax Finish or Oil Stain in a wet-on-wet application. It can take considerably longer to dry in cases where the air is humid or the product over applied.

Product Information Sheet MSDS Full Declaration