Wash and Care

SPECIAL CLEANING CONCENTRATE

Osmo Wash and Care is a special cleaning concentrate for oiled wood flooring and furniture. Designed for cleaning and maintaining floors finished with Hardwax-Oil. Wash and Care is also highly effective on lacquered, stone, tile and vinyl flooring.

Water-soluble: 1 cap of concentrate mixes with 1 litre of water for quick, easy floor maintenance – perfect even for large and high traffic areas. Keeps wooden floors hydrated and prevents them from drying out due to HVAC systems and underfloor heating due to natural oil content within the product which rehydrates the wood surface.

  • Highly effective cleaner for regular usage 
  • Maintains Hardwax-Oil flooring
  • Anti-slip additive increases slip-resistance
  • Moisturizes surface to prevent drying out due to HVAC or underfloor heating
  • Ideal for both commercial and domestic usage
  • Suitable for all oiled, varnished, urethane, lacquered, stone, vinyl and tiled floors
Size

  • Cleans and regenerates the wood at the same time
  • Maintains protected surfaces without extensive treatment
  • Easy to use for occasional or regular usage
  • Replenishes natural hard waxes, without forming a film on the surface
  • Suitable for domestic and commercial use
  • Liquid Wax Cleaner can also be used to enhance the sheen level of the surface
WeightN/A
Application Temp.+5°C to 35°C
Colours1101 Clear Satin
Approx. Coverage295-305m²/L (850-1000 ft2/L)
Approx. Dry Time30 - 40 minutes
Number of CoatsN/A
Sizes400mL (spray), 500mL, 1L

Cleaning & Removing Stains: 

Apply a small amount on a cloth or White Scotchbrite pad and scrub the dirty area

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using a White Scotchbrite pad, scrub a small amount of the product into the dirty area
  3. Wipe away dirt residues

For Heavier Stains: Apply to floor with Osmo polishing pad (very thin steel wool) or on Oak floors, a Green Scotchbrite pad. Wipe off dirt residues and reapply Osmo Polyx®-Oil to area and blend into the existing finish.

 

 

Refreshing Manually with Osmo Opti-Set: 

Apply a thin coat with the Active Fibre Cloth included in the Osmo Opti-Set

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the Active Fibre Cloth work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried with a clean micro-fibre cloth

 

Mechanically with a Floor Buffer: 

Apply a thin coat with an Osmo FloorxCenter and MicroPad; or other single disc buffer and carpet

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the MicroPad, work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried

 

Manually with a Cloth / Rag:

Apply a thin coat with an Osmo FloorxCenter and MicroPad; or other single disc buffer and carpet

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the MicroPad, work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried
Product Information Sheet MSDS Full Declaration